Items

Jug Drinker Single Bowl Heated (*) 101 WH
  • Clearance
  • Item #: BA133
  • Case Qty: 1
  • L25" x W20" x H24"
  • Capacity, 7 gallons
Jug Drinker Double Bowl Heated (*) 202 WH
  • Item #: BA134
  • Case Qty: 1
  • L41" x W20" x H22 1/2"
  • Capacity 14 gallons
Behlen Drinker 2 Hole Insulated(*) EF-2C
  • Item #: BE054
  • Case Qty: 1
  • Freeze Proof, ball waterer, 2 hole top. Water Line required.
  • Float balls seal off cold weather, and prevent algae growth.
Behlen Drinker Super Two Hole (*) SF-2C
  • Item #: BE070
  • Case Qty: 1
  • Heavy foam insulation keeps water at the perfect temperature, regardless of conditions.
  • Designed for heavy cattle use in extremely cold temperatures.
Behlen Poly Earth Tube 18"
  • Item #: BE071
  • Case Qty: 1
  • Provides the protection needed to keep your Auto drinker from freezing below the ground even in the coldest weather
  • 2 in. thick urethane filled walls
Behlen Drinker 4 Hole Insulated(*) FF-4C
  • Item #: BE085
  • Case Qty: 1
  • Freeze Proof, ball waterer, 4 hole top, Water line required.
  • Float balls seal of cold weather and prevent algae growth
Behlen Stock Tank Hog Drinker Galv* 2X2X4 100
  • Item #: BE186
  • Case Qty: 1
  • 2x2x4 Galv stock tank with a drinker window in the side, no plumbing required
  • The waterer box and float are molded from tough, food-grade polyethylene for cleanliness and long-life.
Behlen Drinker Balls 10"
  • Item #: BEH57
  • Case Qty: 1
  • 10" replacement ball for Behlen energy free waterers
Behlen Drinker Part Seal Insert PART
  • Item #: BHL93
  • Case Qty: 1
  • Rubber insert for W334 valve
  • Seal for BLN22 Behlen valve
Behlen Drinker Part Valve Cam Arm PART
  • Item #: BHL94
  • Case Qty: 1
  • Nylon cam for the W334 valve
  • W334 valve is used in Behlen Country heated electric and energy free drinkers manufactured prior to 2005.
Behlen Drinker Thermostat Stempco 3668011
  • Item #: BLN24
  • Case Qty: 1
  • Preset thermostat with 2 open end wires used in all current Behlen electric automatic waterers
Behlen Drinker Super 4 Hole (*) SF-4C
  • Item #: BLN33
  • Case Qty: 1
  • Designed for heavy cattle use in extremely cold temperatures.
  • It has been tested at -20F for 48 hours without freezing up with no animals drinking. (Drinker does need a minimum of 30 animals to guarantee it as frost free)
Behlen Drinker Seal-Franklin Valve 5 PER PKG
  • Item #: BMC10
  • Case Qty: 1
  • Rubber Seal for Monticello and Franklin Valves (Package of 5)
Behlen Float Valve Only Monticello 3/4"
  • Item #: BRO78
  • Case Qty: 1
  • Float Valve
Behlen Float & Arm Monticello
  • Item #: BRO80
  • Case Qty: 1
  • Float & Arm with Screws
Ritchie Disc Ball * SUB RTC47
  • Item #: RE012
  • Case Qty: 1
  • Maintain the water temperature in your Thrifty King CT unit with the fully insulated elliptical shaped closure.
Ritchie Drinker Thrifty King 1 (*) CT1-2000
  • Item #: RTC01
  • Case Qty: 1
  • The Thrifty King CT1 is a single sided energy free automatic livestock waterer.
  • The Ritchie waterer insulates the water so well that you can make it through the winter withouth supplying heat in many areas when installed properly.
Ritchie Drinker Thrifty King 2 (*) CT2-2000
  • Item #: RTC02
  • Case Qty: 1
  • The Thrifty King CT2 is a double sided energy free automatic livestock waterer.
  • The Ritchie insulates the water so well it can make it through the winter without supplying heat in many areas when installed properly.
Ritchie Drinker Thrifty King 4 (*) CT4-2000
  • Item #: RTC03
  • Case Qty: 1
  • The Thrifty King CT4 is a double sided automatic livestock waterer with a total four drinking areas.
  • The Ritchie insulates the water so well it can make it through the winter without supplying heat in many areas when installed properly.
Ritchie Drinker Watermatic 1000 (*) 4 SIDED
  • Item #: RTC04
  • Case Qty: 1
  • The WaterMatic 1000 features an all around drink surface and is fully insulated and impact resist to your larger herds.
  • The drop in cover is easy to lift for maintenance and cleaning.
Ritchie Drinker Watermatic 300 (*) 2 SIDED
  • Item #: RTC05
  • Case Qty: 1
  • The WaterMatic 300 is ideal for fence line application with its two trough design.
  • The waterer is fully insulated and impact resistant to your larger herds.
Ritchie Drinker Watermatic 100 (*) 1 SIDED
  • Item #: RTC06
  • Case Qty: 1
  • The WaterMatic 100 is a small compact design that is fully insulated to keep the water cool in the summer and provides added protection during the winter
  • The drop in cover is easy to lift for maintenance and cleanings
Ritchie Drinker Watermatic 150 (*) 2 SIDED
  • Item #: RTC07
  • Case Qty: 1
  • The WaterMatic 150 is ideal for fence line applications with its small compact two trough design.
  • The waterer is fully insulated to keep the water cool in the summer and provides added protection during the winter.
Ritchie Drinker Watermatic 150S (*) GOAT
  • Item #: RTC08
  • Case Qty: 1
  • The WaterMatic 150S features a domed cover to eliminate standing and climbing.
  • The two trough waterer is fully insulated to keep the water cool in the summer and provides added protection during the winter.
Ritchie Drinker Stall W Heat (*) STAINLESS
  • Item #: RTC09
  • Case Qty: 1
  • Wall mounted Stall Fount 125 delivers fresh, clean water to your horse using time proven valve for on demand rapid refill
  • For freeze protection the Stall Fount has a thermostatically controlled 125 watt trough heater, supply line heat cable, and an adjustable insulated shroud to protect the fount from freezing
Ritchie Drinker Thermal Tube 2Ft (* SUB RTC75
  • Item #: RTC10
  • Case Qty: 1
  • Permanently protect your vertical water supply line from freezing
  • Thermal tube provides two inches of insulation all around with an r-Factor of 7 per inch
Tank De-Icer(Immersion) C-250B 120V-250W
  • Item #: RTC11
  • Case Qty: 8
  • Gives added heat protection to your all plastic Ritchie Waterers during the winter
  • Includes built-in thermostat. Heat turns on around 45 degrees and shuts off at 65 degrees
Ritchie Parts Catalog
  • Item #: RTC12
  • Case Qty: 1
Ritchie Float W/Short Arm(Sf-Small) 1/2" PART
  • Item #: RTC14
  • Case Qty: 1
  • Standard float that is used in the smaller OmniFount waterers and steel Stall Fount waterers
Ritchie Valve Rubber Washer 10Pk 3/4" PART
  • Item #: RTC15
  • Case Qty: 1
  • Replacement valve rubber for 3/4" valve
Ritchie Valve Rubber Washer 10Pk 1/2" PART
  • Item #: RTC16
  • Case Qty: 1
  • Replacement valve rubbers for the 1/2" valve.
  • Available in package of 10
Ritchie Plug (Sub Rth61) #11 PART
  • Item #: RTC17
  • Case Qty: 1
  • 2" Silicone drain plug
Ritchie Float W/Hdw 8-1/4" (Large) 3/4" PART
  • Item #: RTC18
  • Case Qty: 1
  • Easily adjust the water level by loosening and tightening the wing nut.
  • Standard float that is used in all larger waterer series
Ritchie Hardware For Float Pkg 3/4" PART
  • Item #: RTC19
  • Case Qty: 1
  • Replacement hardware package for the 3/4" float series. Includes 2" extension arm, cam, wingnut & washers.
Ritchie Drinker Watermatic 150 (*) GREEN
  • Item #: RTC21
  • Case Qty: 1
  • The WaterMatic 150 is ideal for fence line applications with its small compact two trough design.
  • The waterer is fully insulated to keep the water cool in the summer and provides added protection during the winter.
Ritchie Drinker Watermatic 100 (*) GREEN
  • Item #: RTC22
  • Case Qty: 1
  • The WaterMatic 100 is a small compact design that is fully insulated to keep the water cool in the summer and provides added protection during the winter
  • The drop in cover is easy to lift for maintenance and cleaning
Ritchie Valve Pkg Red Med Psi 1/2"
  • Item #: RTC23
  • Case Qty: 1
  • Ritchie red valve 1/2" 40- 60 psi
Ritchie Valve Pkg Green Hi Psi 1/2"
  • Item #: RTC24
  • Case Qty: 1
  • Ritchie valve 1/2" 60-80 psi
  • Standard valve in Stall Fount waterers
Ritchie Float W Long Arm (Small) 1/2" PART
  • Item #: RTC25
  • Case Qty: 1
  • Standard float that is used in the WaterMatic 100, WaterMatic 150, and WaterMatic 150S waterers
Ritchie Plug (Watermatic) 3"
  • Item #: RTC26
  • Case Qty: 1
  • Designed to fit snug in WaterMatic line of waterers using top of the line features and materials for long life.
  • Insert plug from the inside to ensure proper placement and a tight seal
Ritchie Valve Pkg Cattle Green 3/4"
  • Item #: RTC27
  • Case Qty: 1
  • Can be used on any Ritchie fount that uses 3/4" male valve
  • 3/4" green valve 60-80 psi
Ritchie Drinker Thrifty King 6 (*) CT-6
  • Item #: RTC29
  • Case Qty: 1
  • The Thrifty King CT6 is a double sided automatic livestock waterer wtih a total of six drinking areas.
  • The Ritchie waterer insulates the water so well that you can make it through the winter without supplying heat in many areas when installed properly.
Ritchie Drinker Omni 5 (*) 2 SIDED
  • Item #: RTC30
  • Case Qty: 1
  • OmniFount blends technology from both traditional stainless steel units and insulated poly units to provide the premier livestock fountain.
  • Features smooth rounded edges and a fully insulated poly casing for energy efficiency.
Ritchie Drinker Omni 3 (*) 2 SIDED
  • Item #: RTC31
  • Case Qty: 1
  • OmniFount blends technology from both our traditional stainless steel units and our insulated poly units to provide the premier livestock fountain.
  • Features smooth rounded edges and a fully insulated poly casing for energy efficiency.
Ritchie Heat Element 250W PART
  • Item #: RTC32
  • Case Qty: 1
  • 250 watt 120 volt 2.1 Amp heating element
  • Heating element for Omni 3, 5, 10, Cattlemaster waterers, and Pork King 1
Ritchie Valve Mounting Bracket 3/4" (*)PART
  • Item #: RTC37
  • Case Qty: 1
  • Replacement 3/4" valve bracket for larger units with a standpipe.
Ritchie Drinker Watermaster 96 (*) 8FT
  • Item #: RTC38
  • Case Qty: 1
  • Popular choice in feedlots, pastures, and dairies across North America.
  • Features a heavy 1 piece, fully insulated, polyethylene body that holds up even under the weight of cattle hooves.
Ritchie Valve Pkg 1/2" Bracket W/ SCREWS
  • Item #: RTC40
  • Case Qty: 1
  • Securly mout your valve to the side fo the valve chamber.
  • Standard valve bracket in the Watermatic 100,150, and 150S, Omni 1 and 2, EcoFount series, Pork Kings, steel Stall Founts, and Thrifty King for swine and accommodates all 1/2" pressure valves.