Items

Bj Bale Fork 3Pt (*)
  • Item #: 01118
  • Case Qty: 1
  • A formed frame made of heavy wall 2in. x 3in. rectangular tubing welded to 6in. channel iron.
  • This unit is designed to put the weight of the bale close to the tractor.
Auger 6" Heavy Duty(*) 6" HEAVY
  • Item #: 03206
  • Case Qty: 1
  • Equipped with replaceable cutting edges, double hole mounting , and replaceable screw point
Tailwheel Fork 1 1/4" X 1" (*) PART
  • Item #: AGM07
  • Case Qty: 1
  • This replacement wheel fork is designed to stabilize the wheels when in use. This wheel fork overall length is 5-1/4 inches and fits a standard 15 inch tire
  • Spindle usable length: 4-1/4"
Tailwheel Fork 1 1/2" X 1" (*) PART
  • Item #: AGM09
  • Case Qty: 1
  • Wheel Fork 1-1/2" Shank and Hole for 1" Axle Bolt
  • Wheel Fork
Box Blade Ripper Teeth 3 Hole
  • Item #: AGM11
  • Case Qty: 1
  • This replacement box blade shank is 16 inches long and has 3 holes for easy adjustment. The point has been heat treated for durability and strength.
  • Agmate
Agmate Tailwheel Bushing W Bolts 1"
  • Item #: AGM12
  • Case Qty: 1
  • 1" tail wheel bushing
  • Agmate
Pto Shaft (Tiller, Slip Clutch)(*) 34-44.2
  • Item #: AGM13
  • Case Qty: 1
  • Tiller, slip clutch
  • 1-3/8 6 spline yoke on both ends
Pto Shaft (Phd Shear Pin) (*) 51.5-80.7
  • Item #: AGM15
  • Case Qty: 1
  • Post Hole Digger
  • 1-3/8 6 spline tractor end
Pto Shaft (Rotary, Shear Pin) (*) 42.5-65.6
  • Item #: AGM16
  • Case Qty: 1
  • Rotary Mower
  • 1-3/8 6 spline tractor end
Pto Shaft (Rotary, Spline)(*) 44.9-68.7
  • Item #: AGM17
  • Case Qty: 1
  • Rotary, spline
  • 1-3/8 6 spline tractor end
Pto Shaft (Rotary, Slip Clutch)(*) 47.1-71
  • Item #: AGM18
  • Case Qty: 1
  • Slip Clutch: 4 disc
  • 1-3/8 6 spline tractor end
Stump Jumper Pan Splined Reg (*) 20 1/4"
  • Item #: AGM35
  • Case Qty: 1
  • This stump jumper is constructed from heavy duty steel to help prevent rocks and debris from breaking, clipping or getting caught in the blades. This diameter measures 20-1/4 inches, and there are two bolt holes that measures 13-1/2 inches apart. The center hub has 12 splines, and measures 1-1/2 inches in diameter. This rotary mower stump jumper is compatible with most rotary mowers that use a 40 horsepower gearbox
  • Agmate
Tailwheel Fork, Wheel & Hub 1-1/4"* 4" X 8"
  • Item #: AGM37
  • Case Qty: 1
  • Tailwheel Complete Assembly
  • Fork, Wheel, Hub, Axle Bolt and Nut.
Ag Disc Bearing W/ Flange 1" Axle *
  • Item #: AGM52
  • Case Qty: 1
  • Disc harrow bearing ST208-118, with a 1-inch square bearing bore, is constructed with high quality ball bearings, heavy gauge housings and molded rubber inner seal for durability and long life. These disc harrow bearings are strong enough to protect your disc harrow from both moisture and dirt. Whether used for loosening soil clumps in packed earth, chopping up old crops such as corn, or just using to make future crops easier to plow by eliminating clumps, the disc harrow bearing ST208-118 will keep your disc harrow running efficiently
  • Agmate
Ag Disc Bearing W/ Flange 1-1/8" Ax
  • Item #: AGM53
  • Case Qty: 1
  • This disc harrow bearing has a 1-1/8 inch square bore. The bearing comes with two flange housings held together with 8 rivets to keep dirt and grime out of the bearing for longer life
  • Agmate
Ag Disc Ribbed Spool 7" 1-1/8" AXL
  • Item #: AGM58
  • Case Qty: 1
  • Keeping your tillage in top working order or restoring older disc harrows is easier when you have the correct parts. The 7-1/2 inch bearing spool works with a 1 inch axle. Working in a bearing housing, it can be lubricated to prevent wear and tear and for future maintenance.
  • Agmate
Ag Disc Large Washer End Cap
  • Item #: AGM60
  • Case Qty: 1
  • Use this bumper washer on your disc harrow with a 1 inch axle. This washer fits a 1 inch axle only and is 6-1/4 in. in diameter.
  • Agmate
Ag Disc Spool Spacer 2-3/8"
  • Item #: AGM61
  • Case Qty: 1
  • Bearing spacer 2-3/8" tall for 1" axle that fits onto your square disc axle
  • Agmate
Ag Stump Jumper Pan Hd 15 Spline 60-UP HP
  • Item #: AGM78
  • Case Qty: 1
  • Blade pans also known as stump jumpers, are heavy duty mower parts. These are installed on rotary mowers to protect the blades from rocks, roots and other foreign objects that may cause damage. This blade pan measures 20-1/4 inches in diameter
  • Agmate
Ag Disc Blade Notched 1X1-1/8 Sq 22"
  • Item #: AGM79
  • Case Qty: 1
  • Use this 22 inch notched disc blade for your garden, farm, or field. Disc harrow blades and plow discs have a variety of uses to include discing, hilling, plowing, and turning soil
  • Agmate