Items

Apex Float Valve Long Tail 1"*****
  • Item #: TTX33
  • Case Qty: 1
  • Full flow- diaphragm activated
  • Cord cleat for shutting off valve
Apex Float Valve Long Tail 3/4" 20mm- 3/4in. BSP
  • Item #: TRU71
  • Case Qty: 1
  • Full flow- diaphragm activated
  • Cord cleat for shutting off valve
Apex Repair Kit High & Low Pressure
  • Item #: TTX84
  • Case Qty: 1
  • Diaphragms (new and old versions)
  • Backing Plates (new and old versions
Api Bucket Heated 9 Quart
  • Item #: API25
  • Case Qty: 6
  • Convenient 9-quart capacity with durable built-in steel handle.
  • Rugged resilient plastic to prevent cracking down to -20 degrees F.
Api Bucket Heated Flatback 20 QT
  • Item #: API18
  • Case Qty: 6
  • Large 20-quart (5 gallon) capacity with a sturdy bail.
  • Flat-back design to hang flush against wall.
Api Bucket Heater 742G 1000 WATT
  • Item #: API05
  • Case Qty: 6
  • Designed to heat water as opposed to de-icing water, this powerful bucket heater will heat the water to over 180 degrees F.
  • Thermostatically controlled.
Api Tank De-Icer (Floating) 7521 1500 WATT
  • Item #: API02
  • Case Qty: 6
  • Energy-efficient operation keeps 100-300-gallon stock tank ice free without overheating.
  • Rugged enclosed float will not sink.
Api Tank De-Icer (Floating) 7621 1000 WATT
  • Item #: API01
  • Case Qty: 6
  • Energy-efficient operation keeps 70-100-gallon stock tank ice free without overheating.
  • Rugged enclosed float will not sink.
Api Tank De-Icer (Floating) W/Guard 1500 WATT
  • Item #: API84
  • Case Qty: 6
  • The floating de-icer keeps a stock tank completely ice-free without overheating the water. The thermostatic control with thermal feedback protects the unit from overheating.The thermostat is positioned over the durable stainless steel heating element, which ensures safety in low-water conditions. The float is completely enclosed in a rugged, plastic housing and will not sink over time. The galvanized guard is specially designed to protect rubber, plastic or structural-foam tanks. Recommended for 100-300-gallon tanks. 6-foot cord with durable anti-rub protector. 1500 Watts, 120 Volts, 60 Hz
Api Tank De-Icer (Sinking) 10N 1000 WATT
  • Item #: API04
  • Case Qty: 6
  • Strong, durable, stainless steel heating element.
  • Recommended for 70-100 gallons.
Api Tank De-Icer (Sinking) 15N 1500 WATT
  • Item #: API23
  • Case Qty: 6
  • Strong, durable, stainless steel heating element.
  • Recommended for 100-300 gallons.
Api Tank De-Icer Combo Dt15 1500 WATT
  • Item #: API51
  • Case Qty: 6
  • Easily converts between floating, sinking or drain-plug de-icer.
  • Safe in plastic and metal tanks without use of a guard.
Api Tank De-Icer Drain Plug 15Dp Rm 1500 WATT
  • Item #: API17
  • Case Qty: 6
  • Designed for use in Rubbermaid tanks only.
  • Mounts securely in stock tank's drain plug.
Api Tank De-Icer Snap On Guard 88R
  • Item #: API08
  • Case Qty: 6
  • Fully protects your plastic tank from contacting de-icer heating element.
  • Protects livestock.
Api Tank De-Icer Univ Drain 2002Dp 1500 WATT
  • Item #: API24
  • Case Qty: 6
  • Strong, durable, stainless steel heating element.
  • Thermostatically controlled with thermal feedback for safety.
Api Tank De-Icer Univ Drain 99Dp 1500 WATT
  • Item #: API32
  • Case Qty: 6
  • Fits most stock tanks that have drain holes.
  • Thermostatically controlled with thermal feedback for safety.
Api Tankside De-Icer/Heater 71502 1500 WATT
  • Item #: API07
  • Case Qty: 1
  • Mounts to the side of metal stock tanks.
  • Adjustable and replaceable thermostat.
Api Utility Heater #77 500 WATT
  • Item #: API72
  • Case Qty: 6
  • This utility heater is a versatile unit made of heavy-gauge steel with an durable baked-on enamel finish. Though not immersible, this utility heater can be used under metal buckets, fountains, or as a space heater inside various enclosures. With an adjustable and replaceable thermostat, the utility heater's compact design has a wide range of uses. 12-inch cord. LOCKNDRY compatible. 500 Watts, 120 Volts, 60 Hz
Behlen Drinker 2 Hole Insulated(*) EF-2C
  • Item #: BE054
  • Case Qty: 1
  • Freeze Proof, ball waterer, 2 hole top. Water Line required.
  • Float balls seal off cold weather, and prevent algae growth.
Behlen Drinker 4 Hole Insulated(*) FF-4C
  • Item #: BE085
  • Case Qty: 1
  • Freeze Proof, ball waterer, 4 hole top, Water line required.
  • Float balls seal of cold weather and prevent algae growth
Behlen Drinker Balls 10"
  • Item #: BEH57
  • Case Qty: 1
  • 10" replacement ball for Behlen energy free waterers
Behlen Drinker Part Seal Insert PART
  • Item #: BHL93
  • Case Qty: 1
  • Rubber insert for W334 valve
  • Seal for BLN22 Behlen valve
Behlen Drinker Part Valve Cam Arm PART
  • Item #: BHL94
  • Case Qty: 1
  • Nylon cam for the W334 valve
  • W334 valve is used in Behlen Country heated electric and energy free drinkers manufactured prior to 2005.
Behlen Drinker Seal-Franklin Valve 5 PER PKG
  • Item #: BMC10
  • Case Qty: 1
  • Rubber Seal for Monticello and Franklin Valves (Package of 5)
Behlen Drinker Super 4 Hole (*) SF-4C
  • Item #: BLN33
  • Case Qty: 1
  • Designed for heavy cattle use in extremely cold temperatures.
  • It has been tested at -20F for 48 hours without freezing up with no animals drinking. (Drinker does need a minimum of 30 animals to guarantee it as frost free)
Behlen Drinker Super Two Hole (*) SF-2C
  • Item #: BE070
  • Case Qty: 1
  • Heavy foam insulation keeps water at the perfect temperature, regardless of conditions.
  • Designed for heavy cattle use in extremely cold temperatures.
Behlen Drinker Thermostat Stempco 3668011
  • Item #: BLN24
  • Case Qty: 1
  • Preset thermostat with 2 open end wires used in all current Behlen electric automatic waterers
Behlen Float & Arm Monticello
  • Item #: BRO80
  • Case Qty: 1
  • Float & Arm with Screws
Behlen Float Valve Only Monticello 3/4"
  • Item #: BRO78
  • Case Qty: 1
  • Float Valve
Behlen Poly Earth Tube 18"
  • Item #: BE071
  • Case Qty: 1
  • Provides the protection needed to keep your Auto drinker from freezing below the ground even in the coldest weather
  • 2 in. thick urethane filled walls
Behlen Stock Tank Galv Re223 (*) 2X2X3 71
  • Item #: BE022
  • Case Qty: 2
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Re224 (*) 2x2x4; 103 gal.
  • Item #: BE006
  • Case Qty: 3
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Re225 (*) 2x2x5; 134 gal.
  • Item #: BE007
  • Case Qty: 3
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Re226 (*) 2x2x6; 169 gal.
  • Item #: BE008
  • Case Qty: 3
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Re328 (*) 3X2X8 294
  • Item #: HUT07
  • Case Qty: 2
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Round End (* 2x2x8; 224 gal.
  • Item #: BE019
  • Case Qty: 2
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Have a heavy reinforced steel tube rolled into the top lip for added strength and durability
Behlen Stock Tank Galv Round R32 3x2; 85 gal.
  • Item #: BE024
  • Case Qty: 2
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Heavy reinforced steel tube rolled into the top lip for added strength and durability.
Behlen Stock Tank Galv Round R42 4x2; 165 gal.
  • Item #: BE021
  • Case Qty: 2
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Heavy reinforced steel tube rolled into the top lip for added strength and durability.
Behlen Stock Tank Galv Round R62(*) 6x2; 389 gal.
  • Item #: BE002
  • Case Qty: 3
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Heavy reinforced steel tube rolled into the top lip for added strength and durability.
Behlen Stock Tank Galv Round R82(*) 8x2; 706 gal.
  • Item #: BE003
  • Case Qty: 3
  • Quality manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms.
  • Heavy reinforced steel tube rolled into the top lip for added strength and durability.
Behlen Stock Tank Galv St214 (*) 2x1x4; 44 Gal.
  • Item #: BE004
  • Case Qty: 2
  • 1' deep round end tanks for sheep, goats, and any small animal
  • Built with high quality premium G90 galvanized sheet metal in the sidewalls with bottoms made of extra heavy (20 ga.) galvanized steel
Behlen Stock Tank Galv St216 (*) 2x1x6; 98 Gal.
  • Item #: BE005
  • Case Qty: 1
  • 1' deep round end tanks for sheep, goats, and any small animal
  • Built with high quality premium G90 galvanized sheet metal in the sidewalls with bottoms made of extra heavy (20 ga.) galvanized steel
Behlen Stock Tank Hog Drinker Galv* 2X2X4 100
  • Item #: BE186
  • Case Qty: 1
  • 2x2x4 Galv stock tank with a drinker window in the side, no plumbing required
  • The waterer box and float are molded from tough, food-grade polyethylene for cleanliness and long-life.
Behlen Stock Tank Hog Drinker Poly* 2X2X4
  • Item #: BE746
  • Case Qty: 1
  • Seamless, single piece construction
  • Patented stacking blocks
Behlen Stock Tank Plug & Ring(Galv) PART
  • Item #: BMC29
  • Case Qty: 1
  • Bulkhead fitting for adding accessories
  • Weight: .050
Behlen Stock Tank Plug (For Galv) 3/4
  • Item #: BE053
  • Case Qty: 1
  • Replacement plug for all galvanized tanks with drains.
  • 3/8 Square drive center
Behlen Stock Tank Plug W Ring(Poly) 1 1/4"
  • Item #: BE375
  • Case Qty: 1
  • 1 1/4" Behlen Stock tank plug
  • Include poly plug and washer