Items

Behlen Drinker 2 Hole Insulated(*) Ef-2c
  • Item #: BE054
  • Case Qty: 1
  • Concrete Pad required, Earth Tube recommended. (BE031)
  • Float balls seal off cold weather, and prevent algae growth.
Behlen Drinker 4 Hole Insulated(*) Ff-4c
  • Item #: BE085
  • Case Qty: 1
  • Freeze Proof, ball waterer, 4 hole top, Water line required.
  • Parts Available.
Behlen Drinker Balls 10"
  • Item #: BEH57
  • Case Qty: 1
  • 10" replacement ball for Behlen energy free waterers
Behlen Drinker Electric W/Heater(*) Ahw80
  • Item #: BE092
  • Case Qty: 1
  • Units have non-siphoning water valve, built-in hold downs, removable drain plugs and easily accessible doors. Fully assembled, ready to install.
  • Uses less than 1/4 of the electricity of the 500 watt heaters.
Behlen Drinker Extreme W Heat (*) Ahw100
  • Item #: BEH27
  • Case Qty: 1
  • Powerful 220 watt heater heats the basin and supply line.
  • Animal capacity: no MIN, 80 head Max .
Behlen Drinker Super 4 Hole (*) Sf-4c
  • Item #: BLN33
  • Case Qty: 1
  • 44x44x28, 80 gal water capacity
  • It has been tested at -20F for 48 hours without freezing up with no animals drinking. (Drinker does need a minimum of 30 animals to guarantee it as frost free)
Behlen Drinker Super Two Hole (*) Sf-2c
  • Item #: BE070
  • Case Qty: 1
  • Heavy foam insulation keeps water at the perfect temperature, regardless of conditions.
  • Tested at -20 degrees for 48 hours without freezing with no animals drinking.
Behlen Poly Earth Tube 18"
  • Item #: BE071
  • Case Qty: 1
  • 2 in. thick urethane filled walls
  • Provides the protection needed to keep your Auto drinker from freezing below the ground even in the coldest weather
Float & Arm W/Screws Monticel F/Beh
  • Item #: BRO80
  • Case Qty: 1
  • Float & Arm with Screws
Float Valve Only Monticel F/ Behlen 3/4"
  • Item #: BRO78
  • Case Qty: 1
  • Float Valve
Ritchie 3/4 Valve Mounting Bracket (*)Part
  • Item #: RTC37
  • Case Qty: 1
  • Replacement 3/4" valve bracket for larger units with a standpipe.
Ritchie Anchor Bolt Pkg Set Of 2 (* 3/8x5"
  • Item #: RTC50
  • Case Qty: 1
  • Secure your Ritchie automatic waterer to your concrete pad using these stainless steel anchor bolts.
  • Two bolts are included in each package, 2 packages minimum required for each waterer.
Ritchie Bulkhead For Waterer (*) Part
  • Item #: RTC42
  • Case Qty: 1
  • Factor Replacement Ritchie Part
  • Fits Several of the Ritchie Drinkers
Ritchie Cattle Valve & Plunger (*) Part
  • Item #: RTC59
  • Case Qty: 1
  • 3/4" valve plunger pkg with button, nose-piece, and gasket.
  • This is the only way to buy the 3/4" valve plunger with rubber button without buying the complete valve. It has to come with the correctly dimensioned nosepiece.
Ritchie Classic Equine Sf Fount (*) No Heat
  • Item #: RTC85
  • Case Qty: 1
  • Worry-Free Fast Refill Ritchie Valve & Float System
  • Stainless Steel Cover, Trough and Hardware
Ritchie Classic Equine Sf120v Fnt *
  • Item #: RTH02
  • Case Qty: 1
  • Durable Fully Insulated Casing
  • Run Waterline above, below or behind unit
Ritchie Classic Equine Shroud -30" 30"
  • Item #: RTH03
  • Case Qty: 1
  • Protect your Water Line under your Stall Fount with this Shroud
  • 19.5" Wide x 7.75" Deep x 31" Tall
Ritchie Disc For Thrifty King (*) Part
  • Item #: RTC47
  • Case Qty: 1
  • Replacement elliptical ball for all Thrifty King Waters.
Ritchie Disc Thermostat (*)
  • Item #: RTC46
  • Case Qty: 1
  • Easily adjust the temperature of your heating elements by moving further away or closer to the center of heating element.