Items

Behlen Drinker 2 Hole Insulated(*) Ef-2c
  • Item #: BE054
  • Case Qty: 1
  • Concrete Pad required, Earth Tube recommended. (BE031)
  • Float balls seal off cold weather, and prevent algae growth.
Behlen Drinker 4 Hole Insulated(*) Ff-4c
  • Item #: BE085
  • Case Qty: 1
  • Concrete pad required, Earth Tube recommended (BE031)
  • Float balls seal of cold weather and prevent algae growth
Behlen Drinker Balls 10"
  • Item #: BEH57
  • Case Qty: 1
  • 10" replacement ball for Behlen energy free waterers
Behlen Drinker Electric W/Heater(*) Ahw80
  • Item #: BE092
  • Case Qty: 1
  • Animal Capcity: no min, 80 Maximum
  • Electricity required.
Behlen Drinker Extreme W Heat (*) Ahw100
  • Item #: BEH27
  • Case Qty: 1
  • Large 8 gallon capacity.
  • Molded-in hold downs.
Behlen Drinker Super 4 Hole (*) Sf-4c
  • Item #: BLN33
  • Case Qty: 1
  • Removable top for hot weather operation, or training cattle faster to drink.
  • Animal Capacity: Super 4 Hole: 260 Beef/ 100 Dairy.
Behlen Drinker Super Two Hole (*) Sf-2c
  • Item #: BE070
  • Case Qty: 1
  • Heavy foam insulation keeps water at the perfect temperature, regardless of conditions.
  • Tested at -20 degrees for 48 hours without freezing with no animals drinking.
Behlen Poly Earth Tube 18"
  • Item #: BE071
  • Case Qty: 1
  • Provides the protection needed to keep your Auto drinker from freezing below the ground even in the coldest weather
  • Male / female connection for multiple connection of tubes
Ritchie 3/4 Valve Mounting Bracket (*)Part
  • Item #: RTC37
  • Case Qty: 1
  • Replacement 3/4" valve bracket for larger units with a standpipe.
Ritchie Anchor Bolt Pkg Set Of 2 (* 3/8x5"
  • Item #: RTC50
  • Case Qty: 1
  • Two bolts are included in each package, 2 packages minimum required for each waterer.
  • Secure your Ritchie automatic waterer to your concrete pad using these stainless steel anchor bolts.
Ritchie Bulkhead For Waterer (*) Part
  • Item #: RTC42
  • Case Qty: 1
  • Factor Replacement Ritchie Part
  • Fits Several of the Ritchie Drinkers
Ritchie Cattle Valve & Plunger (*) Part
  • Item #: RTC59
  • Case Qty: 1
  • This is the only way to buy the 3/4" valve plunger with rubber button without buying the complete valve. It has to come with the correctly dimensioned nosepiece.
  • 3/4" valve plunger pkg with button, nose-piece, and gasket.
Ritchie Classic Equine Sf Fount (*) No Heat
  • Item #: RTC85
  • Case Qty: 1
  • Ideal for Individual stall setup
  • Quick & Easy Installation
Ritchie Classic Equine Sf120v Fnt *
  • Item #: RTH02
  • Case Qty: 1
  • 120v Heated Stall Fount
  • Stainless Steel Cover, Energy Efficient Heat Protection
Ritchie Classic Equine Shroud -30" 30"
  • Item #: RTH03
  • Case Qty: 1
  • Stall Fount 30" Shroud
  • Durable fully insulated casing, Corner Mount 10 Year Ritchie Warranty
Ritchie Disc For Thrifty King (*) Part
  • Item #: RTC47
  • Case Qty: 1
  • Replacement elliptical ball for all Thrifty King Waters.
Ritchie Disc Thermostat (*)
  • Item #: RTC46
  • Case Qty: 1
  • Easily adjust the temperature of your heating elements by moving further away or closer to the center of heating element.
Ritchie Drinker Green Ct-2 (*) Ct-2-2000
  • Item #: RTC82
  • Case Qty: 1
  • The Thrifty King CT2 is a double sided energy free automatic livestock waterer.
  • 90 lb shipping weight
Ritchie Drinker Green Ct-4 (*) Ct-4-2000
  • Item #: RTC64
  • Case Qty: 1
  • The covered waterer keeps the water cooler in the summer, reduces loss of water due to evaporation, and protects against mosquitoes breeding.
  • The Thrifty King CT4 is a double sided automatic livestock waterer with a total of four drinking areas.
Ritchie Drinker Omni 1 Ss (*) 1 Side
  • Item #: RTC69
  • Case Qty: 1
  • Built in Anchor Pockets, Mounts securely to concrete pad
  • 304 Stainless Steel Trough
Ritchie Drinker Omni 2 (*) 2 Sided
  • Item #: RTC48
  • Case Qty: 1
  • Easy to maintain & clean. Large side access panel. SS steel trough for long life.
  • Heating elements are mounted directly under teh SS steel trough for great winter performance.
Ritchie Drinker Omni 3 (*) 2 Sided
  • Item #: RTC31
  • Case Qty: 1
  • 75 lb shipping weight.
  • Stainless steel trough features thermostatically controlled heat elements that are attached to the underside for frost free service even in severe conditions.
Ritchie Drinker Omni 5 (*) 2 Sided
  • Item #: RTC30
  • Case Qty: 1
  • 16 gallon capacity.
  • 89 lb shipping weight.
Ritchie Drinker Stall 2 No Heat (*)
  • Item #: RTC20
  • Case Qty: 1
  • 32 lb shipping weight.
  • 16.5 in Long X 17 in Wide X 14 in Tall
Ritchie Drinker Stall No Heat (*) Stainless
  • Item #: RTC60
  • Case Qty: 1
  • Ideal for an individual stall or indoor area where feezing is not a concern.
  • 1.9 gallon- 1 horse capacity.
Ritchie Drinker Stall W Heat (*) Stainless
  • Item #: RTC09
  • Case Qty: 1
  • Constructed with smooth edges of brushed 304 stainless steel for long lasting durability and function
  • 1.9 gallon capacity
Ritchie Drinker Thermal Tube (*) 2ft
  • Item #: RTC10
  • Case Qty: 1
  • Permanently protect your vertical water supply line from freezing
  • Thermal tube provides two inches of insulation all around with an r-Factor of 7 per inch
Ritchie Drinker Thermal Tube (*) 1 Ft
  • Item #: RTC63
  • Case Qty: 1
  • Protect your vertical water supply line from freezing.
Ritchie Drinker Thrifty King 1 (*) Ct1-2000
  • Item #: RTC01
  • Case Qty: 1
  • 28 in Long X 20.3 in Wide X 25 in Tall- 19 in drinking height.
  • Herd capacity 30 head beef, 11.2 gallon
Ritchie Drinker Thrifty King 2 (*) Ct2-2000
  • Item #: RTC02
  • Case Qty: 1
  • The Ritchie insulates the water so well it can make it through the winter without supplying heat in many areas when installed properly.
  • Herd capacity 100 beef, 28 gallon.
Ritchie Drinker Thrifty King 4 (*) Ct4-2000
  • Item #: RTC03
  • Case Qty: 1
  • Herd capacity 200 beef, 45.5 gallon
  • The Ritchie insulates the water so well it can make it through the winter without supplying heat in many areas when installed properly.
Ritchie Drinker Thrifty King 6 (*) Ct-6
  • Item #: RTC29
  • Case Qty: 1
  • 210 lb shipping weight
  • The Thrifty King CT6 is a double sided automatic livestock waterer wtih a total of six drinking areas.
Ritchie Drinker Watermaster 54 (*)
  • Item #: RTC43
  • Case Qty: 1
  • Features a heavy one-piece, fully insulated, polyethylene body that holds up even under the weight of cattle.
  • The trough slopes to a large drain, and can be emptied, cleaned, and refilled in a fraction of the time other waterers take to empty.
Ritchie Drinker Watermaster 600 (*)
  • Item #: RTC76
  • Case Qty: 1
  • A popular choice in feedlots, pastures, and dairies across North America.
Ritchie Drinker Watermaster 96 (*) 8ft
  • Item #: RTC38
  • Case Qty: 1
  • Wide trough allows for split fence access. Herd capacity 300 beef/ 150 dairy.
  • Trough slopes to a large drain & can be emptied, cleaned, and refilled in a fraction of the time other waterers take to empty.
Ritchie Drinker Watermatic 100 (*) 1 Sided
  • Item #: RTC06
  • Case Qty: 1
  • The drop in cover is easy to lift for maintenance and cleanings
  • Trough slopes towards drain hole for easy cleaning and debris removal
Ritchie Drinker Watermatic 100 (*) Green
  • Item #: RTC22
  • Case Qty: 1
  • The drop in cover is easy to lift for maintenance and cleaning
  • 2.8 gallon capacity.
Ritchie Drinker Watermatic 1000 (*) 4 Sided
  • Item #: RTC04
  • Case Qty: 1
  • Optional heat package is required in freezing conditions. Heater # RTC11
  • The WaterMatic 1000 features an all around drink surface and is fully insulated and impact resist to your larger herds.
Ritchie Drinker Watermatic 150 (*) 2 Sided
  • Item #: RTC07
  • Case Qty: 1
  • Low capacity and fast refill valve allows for low water waste and fresh water on demand.
  • The drop cover is easy to lift for maintanance and cleaning.
Ritchie Drinker Watermatic 150 (*) Green
  • Item #: RTC21
  • Case Qty: 1
  • Herd capacity- 40 beef, 40 horses, or 100 sheep.
  • Drain plugs can be moved to the valve chamber opening for short term trough shut off during cleaning, when the pen is empty, or during excessively cold nights.
Ritchie Drinker Watermatic 150s (*) Goat
  • Item #: RTC08
  • Case Qty: 1
  • The WaterMatic 150S features a domed cover to eliminate standing and climbing.
  • 39 lb shipping weight.
Ritchie Drinker Watermatic 150s Grn (*)
  • Item #: RTC80
  • Case Qty: 1
  • The two trough waterer is fully insulated to keep the water cool in the summer and provides added protection during the winter.
  • Low capacity and fast refill valve allows for low water waste and fresh water on demand.
Ritchie Drinker Watermatic 300 (*) 2 Sided
  • Item #: RTC05
  • Case Qty: 1
  • 8.2 gallon capacity.
  • Trough slopes towards drain holes for easy cleaning and debris removal.
Ritchie Float W Long Arm (Small) Part
  • Item #: RTC25
  • Case Qty: 1
  • Standard float that is used in the WaterMatic 100, WaterMatic 150, and WaterMatic 150S waterers
Ritchie Float W/Hdw 8-1/4" (Large) 3/4" Part
  • Item #: RTC18
  • Case Qty: 1
  • Standard float that is used in all larger waterer series
  • Easily adjust the water level by loosening and tightening the wing nut.
Ritchie Float W/Short Arm(Sf-Small) 1/2" Part
  • Item #: RTC14
  • Case Qty: 1
  • Standard float that is used in the smaller OmniFount waterers and steel Stall Fount waterers
Ritchie Hardware For Float Pkg Part
  • Item #: RTC19
  • Case Qty: 1
  • Replacement hardware package for the 3/4" float series. Includes 2" extension arm, cam, wingnut & washers.
Ritchie Heat Element 125 Watt (*) Part
  • Item #: RTC56
  • Case Qty: 1
  • Mounted directly under the trough for overall heat coverage and reliable performance even under the most extreme winter conditions.
Ritchie Heat Element 250w Part
  • Item #: RTC32
  • Case Qty: 1
  • 250 watt 120 volt 2.1 Amp heating element
  • Heating element for Omni 3, 5, 10, Cattlemaster waterers, and Pork King 1
Ritchie Pin For 3/4 Valve 2 Pack
  • Item #: RTH19
  • Case Qty: 1
  • 2 pack Ritchie Pins for 3/4" Valve
Ritchie Plug (Thrifty King, Occ) #11 Part
  • Item #: RTC17
  • Case Qty: 1
  • 2" Silicone drain plug
Ritchie Plug (Watermatic) 3"
  • Item #: RTC26
  • Case Qty: 1
  • Insert plug from the inside to ensure proper placement and a tight seal
  • Designed to fit snug in WaterMatic line of waterers using top of the line features and materials for long life.
Ritchie Plug Omni 1-1/4" Plastic (* 2 Pack
  • Item #: RTC41
  • Case Qty: 1
  • Drain plugs are designed to seal the trough at the drain pipe location and for easy removal for easy cleaning.
  • Each package contains two drain plugs.
Ritchie Rubber Plug Stall Fount (*)
  • Item #: RTH07
  • Case Qty: 1
  • Made of Silicone in order to remail pliable. Featured in both heated & energy free version of SS Steel Stall Fount.
  • Designed to be inserted from the top. Drain plug will sit flush with the bottom of the fount.
Ritchie Self Regulating Heat Cable (*) Part
  • Item #: RTC49
  • Case Qty: 1
  • Easy installation and replacement using it's plug-in feature.
  • Give added protection to your valve and waterline with the Self Regulating Heat Cable featuring a built in thermostat.
Ritchie Thermal Tube Extension(*) 2ft
  • Item #: RTC75
  • Case Qty: 1
  • Protect your vertical water supply line from freezing.
  • The two foot extension allows you to combine thermal tube extensions and tops to the depth needed to reach 1 foot below your frost line.
Ritchie Valve Pkg 1/2" Bracket W/ Screws
  • Item #: RTC40
  • Case Qty: 1
  • Securly mout your valve to the side fo the valve chamber.
  • Standard valve bracket in the Watermatic 100,150, and 150S, Omni 1 and 2, EcoFount series, Pork Kings, steel Stall Founts, and Thrifty King for swine and accommodates all 1/2" pressure valves.
Ritchie Valve Pkg Cattle Grn 3/4"
  • Item #: RTC27
  • Case Qty: 1
  • Can be used on any Ritchie fount that uses 3/4" male valve
  • 3/4" green valve 60-80 psi
Ritchie Valve Pkg Green Hi Psi 1/2"
  • Item #: RTC24
  • Case Qty: 1
  • Standard valve in Stall Fount waterers
  • Ritchie valve 1/2" 60-80 psi
Ritchie Valve Pkg Red Med Psi 1/2"
  • Item #: RTC23
  • Case Qty: 1
  • Ritchie red valve 1/2" 40- 60 psi
Ritchie Valve Rubber Washer 10pk 3/4" Part
  • Item #: RTC15
  • Case Qty: 1
  • Replacement valve rubber for 3/4" valve
Ritchie Valve Rubber Washer 10pk 1/2" Part
  • Item #: RTC16
  • Case Qty: 1
  • Available in package of 10
  • Replacement valve rubbers for the 1/2" valve.
Stock Tank 224 W Hog Drinker W1 (*) 2x2x4 100
  • Item #: BE186
  • Case Qty: 1
  • The built-in float guard protects the valve and float mechanism.
  • Approximately 100 gallon capacity.
Tank De-Icer(Immersion) C-250b 120v-250w
  • Item #: RTC11
  • Case Qty: 1
  • Raised design to allow for water circulation
  • 120V @ 250 Watts
Tru Waterpro 2 Open Auto Water (*) 2 Hole
  • Item #: TT031
  • Case Qty: 1
  • Capacity - 7 gal
  • Drinking height - 21.65"
Tru Waterwell 2 Livestock Water (*) 2 Hole
  • Item #: TT030
  • Case Qty: 1
  • Capacity - 31 gal
  • Herd capacity - 110 beef
Tru Waterwell 4 Livestock Water (*) 4 Hole
  • Item #: TT029
  • Case Qty: 1
  • Capacity - 60 gal
  • Herd capacity - 200 beef